Description

Recumbent Mouse Safety Flag – Custom Double-Sided Embroidered Whip Banner

Stay High-Vis While Riding Low to the Ground

Because recumbent bikes and trikes sit close to the pavement, staying visible to approaching motorists, utility vehicles, and fellow cyclists is critical. A high-flying whip flag elevates your presence on open roads, neighborhood crossings, and crowded multi-use greenways.

Whether you pedal a commuter route, cruise city paths, or tour cross-country highways, this banner keeps your machine noticed. Fly an adorable recumbent mouse rider that pairs essential road safety with genuine cycling fun.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin screen-printed polyester flags quickly fray and pull apart along the fly end. Continuous wind sheer and sunlight quickly ruin cheap materials.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also sheds rain mist, road grease, and trail dirt with ease. Consequently, your flag stays bright and sharp across long riding seasons.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and heat transfers peel, crack, and fade under outdoor exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork showcases a smiling gray mouse pedaling a recumbent bicycle—complete with its own lime green whip pennant—against vivid bright orange cloth[cite: 15]. Thus, your custom cycling whip banner will look sharp and turn heads on the trail for years to come.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and motorists see your artwork from any angle.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists wind whip, branch strikes, and sun damage.

• Low-Profile Road Safety: Elevated flag height keeps low-clearance recumbents noticeable to standard passenger cars and lifted trucks.

• Multiple Secure Mounts: Choose standard pole sleeves, solid brass grommets, or lighted whip sleeves[cite: 8, 11].

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit almost any outdoor vehicle or fun setup[cite: 8]. Because we offer flexible mount styles, you can attach them easily to:

• Recumbent Bikes & Trikes: Mounts cleanly on Catrike, TerraTrike, ICE Trikes, HP Velotechnik, Sun Seeker, and Greenspeed whip mounts.

• Commuter Bicycles & E-Bikes: Attaches to rear axle mounts, dropouts, cargo racks, and child trailer safety whip rods.

• Mobility Scooters & Electric Wheelchairs: Mounts easily to seat frame brackets and cane holder flag mounts for neighborhood cruising.

• Golf Carts & Neighborhood Cruisers: Fits rear roof struts, canopy bars, and back seat grab handles.

• Youth Bicycles & Go-Karts: Great for pedal karts, youth trikes, and balance bike flag poles.

• ATVs, Side-by-Sides & UTVs: Slides smoothly onto standard fiberglass dune whips for trail runs[cite: 8, 11].

📐 Specifications & Sizing

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods[cite: 11].

• Clip System: We set solid brass grommets into the reinforced hem for carabiners, zip-ties, or clamps[cite: 8].

• Lighted Whip Sleeve: Sized to slide over 1″ to 1.25″ LED light tubes; includes zip ties and hardware.

Need help putting your flag on? View our Whip Flag Mounting Instructions

Waving Recumbent Rider