Description

Save Your Nuts Squirrel Recumbent Safety Flag – Custom Double-Sided Embroidered Whip Banner

Stay High-Vis While Riding Low to the Ground

Because recumbent bikes and trikes sit much lower than standard upright bicycles, commanding driver attention in traffic, at busy crossings, and along shared trails is essential. Flying an elevated safety whip banner ensures passing trucks, SUVs, and fellow trail users spot your machine from a safe distance. Therefore, drivers can give you ample passing space on narrow shoulders and suburban roads.

Whether you pedal urban commuter routes, paved park greenways, or cross-country tours, this banner elevates your presence. Fly a cheeky squirrel design that pokes fun at traditional bike saddle discomfort while keeping your low-profile ride protected and seen.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags quickly rip, fray, and shred along the edges after a few weeks of riding.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also sheds road grime, chain mist, and rain spray with ease. Consequently, your flag stays clean, vibrant, and sharp through thousands of miles.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers peel, crack, and fade under continuous outdoor sun exposure. Because we value true craftsmanship, we stitch our artwork directly into the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no reverse bleed-through. The stitched artwork highlights the arched slogan “SAVE YOUR NUTS”, a detailed squirrel clutching an acorn, and the bottom slogan “RIDE RECUMBENT” in dense black thread across radiant lime squeeze cloth[cite: 18]. Thus, your custom cycling whip banner will look sharp and turn heads on every route.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and motorists read your banner clearly from either direction[cite: 18].

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists wind shear, weather, and sun exposure.

• Low-Clearance Road Safety: Elevated flag placement keeps low-profile bikes and trikes noticeable to vehicle drivers.

• Multiple Secure Mounts: Choose standard pole sleeves, solid brass grommets, or lighted whip sleeves.

Compatible Rides and Setups

Our heavy-duty flags mount easily to a wide selection of bicycles, mobility setups, and off-road vehicles:

• Recumbent Bikes & Trikes: Mounts cleanly on Catrike, TerraTrike, ICE Trikes, Sun Seeker, HP Velotechnik, and Greenspeed whip mounts.

• Commuter Bicycles & E-Bikes: Fits rear dropouts, axle mounts, pannier racks, and child trailer safety whip brackets.

• Mobility Scooters & Wheelchairs: Mounts easily to backrest brackets and rear frame poles for neighborhood safety.

• Golf Carts & Neighborhood Cruisers: Fits rear roof struts, canopy poles, and utility racks.

• Youth Bicycles & Go-Karts: Great for pedal karts, youth trikes, and balance bike flag rods.

• ATVs, UTVs & Off-Road Rigs: Slides easily onto standard fiberglass whips for sandy washes and desert trails.

📐 Specifications & Sizing

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

• 10″ x 15″ Rectangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass bicycle and safety whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Sized for 1″ to 1.25″ whip tubes for evening riders using lighted LED safety poles.

Need mounting help? Review our Whip Flag Mounting Instructions.

 

Road Cyclist