Why Choose a Big Sexy Safety Flag for Your Rig

When you blast across wide-open sand dunes, rugged trails, or tie up at the sandbar, high visibility is essential. With a Big Sexy safety flag, other riders and boaters can spot your high-visibility orange banner quickly from a distance, keeping you safe while putting your bold swagger and fun personality on full display.

Durable 200D Nylon Fabric That Resists Tearing

Because your machine faces extreme wind, heavy sandblast, and outdoor brush, each banner uses tough Oxford nylon. As a result, the material will not rip or fray easily during fast rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and direct sun exposure.

Double-Sided Embroidered Text That Lasts

We sew the bold, chunky “BIG SEXY” lettering directly into the material in dense black embroidery thread on both sides of the banner. Your setup stays visible and hilarious from every angle. Unlike cheap printed products that peel and crack under the sun, tight embroidery keeps your setup looking clean trip after trip.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Heavy-Duty Fabric: Weather-resistant cloth blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Easily fits standard whip poles, lighted whips, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

The post Big Sexy appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic problem child safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “PROBLEM CHILD” custom typography in dense white thread that stands out vividly against the rich blue background cloth. Thus, your custom problem child safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

I Do All My Own Stunts Dirt Bike

The post Problem Child appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic banshee whip safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “Banshee Whip” custom typography in dense white thread that stands out vividly against the vibrant red background cloth. Thus, your custom banshee whip safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Yamaha Banshee

The post Banshee Whip appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic fuck cancer safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold blue “FUCK” typography with an integrated awareness ribbon graphic replacing the letter C, paired with script “cancer” in dense thread that stands out vividly against the vibrant pink background cloth. Thus, your custom fuck cancer safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Fuck Cancer Skull

The post Fuck Cancer Ribbon appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic but did we die safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “BUT DID WE DIE?” custom typography in dense black thread that stands out vividly against the high-visibility orange background cloth. Thus, your custom but did we die safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Stitch

The post But Did We Die appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this funny high-roller design high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a stylized dollar sign in bright green thread flanked by the cheeky “It’s Only Paper” typography in dense white thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Big Sexy Chubby Guy

The post It’s Only Paper appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic big daddy safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “BIG DADDY” custom typography in dense white thread that stands out vividly against the vibrant red background cloth. Thus, your custom big daddy safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Papa Smurf

The post Big Daddy appeared first on Devil Woman Flags.

Product Long Description

Why Run a Burn Rice Not Belts Safety Whip Flag on Your Rig

Whether carving the steep razorbacks at Glamis, Dumont Dunes, or Sand Hollow, rock crawling tight canyon switchbacks, or opening up high-speed desert washes, running a tall whip flag ensures oncoming vehicles, spotters, and group leaders spot your rig over blind crests and through heavy roost plumes.

Designed specifically for the direct-drive, sequential-shift Yamaha YXZ1000R community, this banner pairs the iconic Yamaha crossed tuning forks circular emblem with the ultimate CVT callout: BURN RICE across the top and NOT BELTS along the bottom. Stitched in bright, heavy-density white embroidery thread, the artwork delivers crisp contrast against the rich royal blue nylon background, making your machine instantly recognizable across crowded dunes and trails.

200D Oxford Nylon Built for Rigorous Trail & Dune Abuse

Standard printed novelty flags fray quickly along the fly hem, crack under continuous wind buffeting, and bleach out rapidly in the desert sun. For this reason, we craft every banner using heavy-duty 200D Oxford nylon.

Consequently, this fabric prevents premature fly-end fraying, repels trail mud and moisture, and resists UV fading across demanding riding seasons. Whether mounted to your roll cage clamp, chase rack tab, or fiberglass whip pole, it delivers lasting performance.

Double-Sided Machine Embroidery That Outlasts Printing

Screen-printed graphics and vinyl heat transfers peel, crack, and wash away under mud, sun, and pressure washing. In contrast, our Yamaha tuning forks and block text are directly machine-embroidered on both sides of the banner.

Both sides feature clean, dense thread coverage with zero unsightly reverse-side bleed. The sharp angles of the tuning forks and the textured letters stay razor-sharp ride after ride.

Key Features of This Embroidered Off-Road Flag

• Double-Sided Machine Embroidery: Complete two-sided embroidery provides clear 360-degree visibility from all angles.

• Tough 200D Oxford Nylon: Heavy-duty fabric resists wind whip, branch strikes, roost abrasion, and UV degradation.

• Targeted Yamaha YXZ Enthusiast Styling: Tailored for Yamaha YXZ1000R sport side-by-sides, Raptor ATVs, and manual-shift off-road machines.

• Dune & Trail Park Ready: Meets visibility and height standards for public sand dunes and state OHV recreation areas.

• Flexible Attachment Options: Available with solid brass grommet clip systems, reinforced regular whip sleeves, or lighted LED whip sleeves.

📐 Specifications & Sizing

Available Sizes

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant

• 12″ x 18″ Pennant

Mounting Options

• Clip System: Heavy-duty solid brass grommets set into the reinforced hem for carabiner, zip-tie, or rubber-lined clamp attachment to roll cages, rear tabs, and whip mounts.

• Regular Whip Sleeve: Reinforced channel slides smoothly over standard 1/4″, 5/16″, and 3/8″ fiberglass whip poles.

• Lighted Whip Sleeve: Sized to slide over 1″ LED whip tubes; includes zip tie, mini hose clamp, and instructions.

Need help installing? View our Whip Flag Mounting Instructions.

Yamaha Personalized

The post Burn Rice Not Belts Yamaha appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic combat army veteran safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “COMBAT ARMY VETERAN…” custom typography in dense yellow thread paired with “AT YOUR OWN RISK” in white thread that stands out vividly against the sleek black background cloth. Thus, your custom combat army veteran safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Bigfoot US Army

The post Combat Army Veteran appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic dune diva safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “Dune Diva” custom typography paired with an elegant crown graphic in dense black thread that stands out vividly against the vibrant pink background cloth. Thus, your custom dune diva safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Barbie Doll

The post Dune Diva appeared first on Devil Woman Flags.