Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic but did you die safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “But did you die?” custom typography in dense black thread that stands out vividly against the high-visibility orange background cloth. Thus, your custom but did you die safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

No Problem

The post But Did You Die? appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic life is good safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “LIFE IS GOOD” typography incorporating cheerful smiley faces inside the letter “O”s in dense white thread that stands out vividly against the vibrant red background cloth. Thus, your custom life is good safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Retro Smiley Face

The post Life Is Good appeared first on Devil Woman Flags.

Why Choose a Living The Dream Safety Flag for Your Rig

Riding low machines on public trails can put you out of sight. Therefore, running a tall whip flag is vital for rider safety. Many riders choose a Living The Dream safety flag for maximum visibility and peace of mind.

This flag pairs vibrant visibility with upbeat off-road attitude. In addition, the sharp stitching helps trail spotters see your machine right away. As a result, you can share great vibes across the dunes while staying safe.

Durable 200D Nylon Fabric That Resists Tearing

Your machine faces strong head winds, sun rays, and trail dirt. For this reason, we build each banner with tough Oxford nylon.

Consequently, the strong cloth will not tear during fast dune runs or rough trail rides. In addition, the thick fabric blocks harsh sun rays and bad weather.

Double-Sided Embroidered Artwork That Lasts

We stitch the bold “LIVING THE DREAM” lettering directly into the cloth on both sides of the banner. Because we use dense thread, your flag stays clean and easy to read from any angle.

Furthermore, you can pick from many fabric and thread colors to match your machine. Unlike printed flags that crack or peel in the sun, heavy stitching lasts for years.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching gives full 360-degree views.

• Custom Color Options: Choose your favorite fabric and thread colors to match your ride.

• Heavy-Duty Fabric: Weather-proof 200D Oxford nylon resists wind tear and sun fade.

• Multiple Shapes and Sizes: Pick from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Fits fiberglass rods, lighted whips, trike poles, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Smiley Face

The post Living the Dream appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic my happy place safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “MY HAPPY PLACE” custom typography in dense black thread that stands out vividly against the high-visibility orange background cloth. Thus, your custom my happy place safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

The post My Happy Place appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic geezer gang safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold flaming “GEEZER GANG” lettering in dense black thread paired with a vibrant orange skull and crossbones graphic that stands out vividly against the high-visibility yellow background cloth. Thus, your custom geezer gang safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Classic Skull and Crossbones

The post Geezer Gang appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic ridin dirty safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “RIDIN’ DIRTY” custom typography in dense blue thread that stands out vividly against the crisp white background cloth. Thus, your custom ridin dirty safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

FU Alien

The post RIDIN’ DIRTY appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic old guys rule safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “OLD GUYS RULE!” custom typography in dense white thread that stands out vividly against the dark green background cloth. Thus, your custom old guys rule safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Punisher Skull

The post Old Guys Rule appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic live a great story safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “LIVE A GREAT STORY” custom typography in dense white thread that stands out vividly against the rich blue background cloth. Thus, your custom live a great story safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Thumbs Up

The post Live A Great Story appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic old guy safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights bold “OLD GUY” custom typography in dense black thread that stands out vividly against the high-visibility orange background cloth. Thus, your custom old guy safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Big Sexy Chubby Guy

The post Old Guy appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this adventurous off-road design high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the adventurous quote “Of All The Paths You Take In Life Make Sure A Few Of Them Are Dirt” in dense black thread, accented by white pine trees, that stands out vividly against the high-visibility red background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Hatchet Girl

The post Dirt Paths appeared first on Devil Woman Flags.