Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this rugged western pop-culture design high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the classic hooked “Y” brand and stars flanked by “TEAM RIP” and “TRAIN STATION TOURS” typography in dense yellow thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Yellowstone Dutton Ranch

The post Team Rip Train Station Tours appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly the iconic “Never Say Die” adventure design high above your machine with fearless cinematic flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the classic skull emblem alongside crisp movie typography in dense, textured silver thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions

The Goonies Skull 1985

The post The Goonies Skull Never Say Die appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly the iconic “Hey You Guys” adventure design high above your machine with fearless cinematic flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the classic skull emblem alongside crisp movie typography in dense, textured silver thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions

Goonies Sloth Never Say Die

The post Goonies Sloth Hey You Guys appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly the iconic “Never Say Die” adventure design high above your machine with fearless cinematic flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the classic skull emblem alongside crisp movie typography in dense, textured silver thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions

Sloth

The post Goonies Sloth Never Say Die appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly the iconic adventure design high above your machine with fearless cinematic flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the classic skull emblem and crossed cutlasses in dense, textured silver thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

The Goonies Sloth

The post Sloth appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly the classic dual-revolver gunslinger silhouette alongside the legendary Tombstone quote high above your machine with fearless confidence and outlaw grit.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights Doc Holliday in his wide-brim hat, vest, and dual outstretched revolvers above script typography reading “You’re a daisy if ya do.” in dense, textured thread that stands out vividly against the background cloth[cite: 73]. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves[cite: 73].

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Doc Holliday Say When

The post Doc Holliday Daisy appeared first on Devil Woman Flags.

Why Choose a One Eyed Willie Goonies Safety Flag for Your Rig

When you ride on open dunes, rugged trails, or waterways, a bright novelty banner is truly essential. Consequently, other riders can spot your setup quickly from a distance. Therefore, your One Eyed Willie Goonies safety flag keeps you safe while showing off the iconic pirate legend from Astoria.

Durable 200D Nylon Fabric That Resists Tearing

Because your machine faces extreme wind and outdoor brush, each outdoor whip flag uses tough Oxford nylon. As a result, the material will not rip or fray easily during fast rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions.

Double-Sided One Eyed Willie Skull Stitching That Lasts

In addition, we sew the detailed One Eyed Willie pirate skull and classic slogan on both sides of the banner. Consequently, your setup stays visible and sharp from every direction. Unlike cheap printed products that peel and fade, our tight embroidery keeps your setup looking clean trip after trip.

Key Features of This Embroidered Pirate Banner

• Double-Sided Embroidery: First, two-sided stitching provides full 360-degree visibility.

• Heavy-Duty Fabric: Next, weather-resistant cloth blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Also, you can choose from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Finally, each product easily fits standard whip poles, lighted whips, or clip setups.

📐 Specifications & Sizing

Available Sizes for Every One Eyed Willie Goonies Safety Flag

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

The post One Eyed Willie Goonies appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Fairways

Navigating bustling streets, crowded OHV sand dunes, or low-profile bike trails demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether patrolling neighborhood streets in a golf cart, blazing desert washes in a side-by-side, or pedaling a recumbent trike, this banner stands out. Fly the classic, unmistakable bat insignia high above your machine with pride and confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sandblast, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the bold oval bat emblem in dense, premium thread that stands out vividly against the durable nylon background. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose standard pole sleeves, solid brass grommets, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, and commuter vehicles:

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Mobility Scooters & Electric Wheelchairs: Mounts to backrest frames and safety whip brackets for neighborhood cruising.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Superman

The post Batman appeared first on Devil Woman Flags.

Command Instant Attention Across High-Speed Dunes, Washes, and Trails

Navigating blind dune crests, dense forest trails, and dusty desert washes requires maximum height and visibility. In fact, a high-mounted safety whip banner ensures approaching UTVs, dirt bikes, and sand rails spot your rig well before cresting a ridge. Therefore, fellow drivers can navigate safely around blind turns and avoid dangerous head-on collisions.

Whether carving bowls at Glamis, crawling rocky desert trails, or hanging out around the night camp, this banner commands attention. Fly an unmistakable horror icon that gets huge laughs across the staging area while keeping your machine compliant with OHV park regulations.

Tough 200D Oxford Nylon Built to Endure High Speeds and Wind Whip

Flimsy printed flags tear away from grommets and shred to ribbons under high speeds and desert winds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels sand grit, mud splatter, and trail roost with ease. Consequently, your flag stays intact through intense off-road weekends.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and sandblast away in rough outdoor conditions. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the slasher mask profile alongside bold slogan typography reading “FREE RIDES TO THE MIDDLE OF THE DESERT” with a dripping horror-style font. Thus, your off-road whip banner will look sharp and hold up to every ride.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and off-roaders spot your flag clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Off-Road Dune Compliance: Elevated whip mounting ensures your vehicle meets BLM, state, and OHV park safety flag rules.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit almost any off-road vehicle or trail setup:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx KRX, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Dune Buggies & Sand Rails: Mounts cleanly to upper roll cages, light bars, and fiberglass safety poles.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Off-Road Trucks & Chase Rigs: Perfect for front bumper mounts, bed chase racks, and tailgate whip brackets.

• Golf Carts & Neighborhood Cruisers: Fits rear roof canopy struts and passenger handrails.

• Dirt Bikes & ATC 3-Wheelers: Mounts to rear axle whip brackets for sand dune compliance.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Chucky

The post Michael Myers Halloween appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly the iconic “Never Say Die” adventure design high above your machine with fearless cinematic flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the classic skull emblem alongside crisp movie typography in dense, textured silver thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Goonies Sloth

The post The Goonies Sloth appeared first on Devil Woman Flags.