Stay Visible Across High-Speed Dunes, Washes, and Single-Track Trails

Navigating blind dune crests, dense forest single tracks, and dusty desert washes requires maximum height and visibility. In fact, a high-mounted safety whip banner ensures approaching side-by-sides, quads, and buggy drivers spot your bike well before cresting a ridge. Therefore, fellow riders can steer safely around blind turns and avoid dangerous head-on collisions.

Whether carving bowls at Glamis, sending it over desert whoops, or hitting off-road park tracks, this banner commands attention. Fly a hilarious, tongue-in-cheek crash scene that gets laughs at the staging area while keeping your bike visible and dunes-compliant.

Tough 200D Oxford Nylon Built to Endure High Speeds and Wind Whip

Flimsy printed flags tear away from grommets and shred to ribbons under high-speed roost and desert winds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels sand grit, mud splatter, and trail roost with ease. Consequently, your flag stays intact through intense riding seasons.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and sandblast away in rough outdoor conditions. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights an ejected rider flying mid-air above a launching dirt bike bouncing off a jump crest, paired with the slogan “I do ALL” and “my own stunts” in dense thread. Thus, your off-road whip banner will look sharp and hold up to every ride.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and off-roaders spot your flag clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Off-Road Dune Compliance: Elevated whip mounting ensures your motorcycle meets BLM, state, and OHV park safety flag rules.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit almost any off-road vehicle or trail setup:

• Dirt Bikes & Motocross: Fits rear axle flag mounts and swingarm whip brackets on Honda CRF, Yamaha YZ/WR, KTM SX/XC, Kawasaki KX, Husqvarna, and Suzuki RM-Z bikes.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Side-by-Sides & UTVs: Fits roll cages and whip tabs on Polaris RZR, Can-Am Maverick, and Kawasaki Teryx.

• Dune Buggies & Sand Rails: Mounts cleanly to upper chassis frames and fiberglass safety poles.

• Off-Road Trucks & Chase Rigs: Perfect for front bumper tabs, bed chase racks, and tailgate mounts.

• Golf Carts & Neighborhood Cruisers: Fits rear roof canopy struts and passenger handrails.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

Mounting Options & Easy Hardware Choices

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Lighted Whip Sleeve: Sized for 1″ to 1.25″ whip tubes for evening duners running lighted LED whip poles.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Suzuki

The post I Do All My Own Stunts Dirt Bike appeared first on Devil Woman Flags.

Stay Visible Across High-Speed Dunes, Washes, and Mountain Trails

Navigating blind dune crests, dense forest trails, and dusty desert washes requires maximum height and visibility. In fact, a high-mounted safety whip banner ensures approaching side-by-sides, dirt bikes, and sand rails spot your four-wheeler well before cresting a ridge. Therefore, fellow riders can steer safely around blind turns and avoid dangerous collisions.

Whether carving bowls at Glamis, tackling rock ledges in Hatfield-McCoy, or blasting open desert tracks, this banner commands attention. Fly a hilarious, tongue-in-cheek quad scene that gets laughs at the staging area while keeping your machine visible and dunes-compliant.

Tough 200D Oxford Nylon Built to Endure High Speeds and Wind Whip

Flimsy printed flags tear away from grommets and shred to ribbons under high-speed roost and desert winds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels sand grit, mud splatter, and trail spray with ease. Consequently, your flag stays intact and vibrant through rough riding seasons.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and sandblast away in rough outdoor conditions. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights an ejected quad rider flying mid-air above an overturned ATV launching off a dirt berm, paired with the slogan “I do ALL” and “my own stunts” in dense black thread across bright safety yellow cloth. Thus, your off-road whip banner will look sharp and hold up to every ride.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and off-roaders spot your flag clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Off-Road Dune Compliance: Elevated whip mounting ensures your ATV meets BLM, state, and OHV park safety flag rules.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit almost any off-road vehicle or trail setup:

• ATVs & 4-Wheelers: Fits Yamaha Raptor, YFZ450R, Grizzly, Honda TRX450R, Foreman, Can-Am Renegade, Outlander, Polaris Sportsman, and Scrambler rear grab bars and whip brackets.

• Side-by-Sides & UTVs: Mounts cleanly to upper roll cages and whip tabs on Polaris RZR, Can-Am Maverick, and Kawasaki Teryx.

• Dune Buggies & Sand Rails: Attaches to upper chassis mounts and fiberglass safety poles.

• Dirt Bikes & ATC 3-Wheelers: Mounts to rear axle whip brackets for sand dune compliance.

• Off-Road Trucks & Chase Rigs: Perfect for front bumper tabs, bed chase racks, and tailgate mounts.

• Golf Carts & Neighborhood Cruisers: Fits rear roof canopy struts and passenger handrails.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

Mounting Options & Easy Hardware Choices

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Lighted Whip Sleeve: Sized for 1″ to 1.25″ whip tubes for evening duners running lighted LED whip poles.

Need help putting your flag on? View our Whip Flag Mounting Instructions

Hot Wheels

The post I Do All My Own Stunts ATV appeared first on Devil Woman Flags.

Why Choose a Suzuki S Logo Safety Flag for Your Rig

Riding low machines on public trails can put you out of sight. Therefore, running a tall whip flag is vital for rider safety.

This flag pairs intense high-visibility yellow with the unmistakable blue Suzuki “S” emblem. In addition, the sharp, clean stitching helps trail spotters see your machine right away. As a result, you can represent your QuadRacer, KingQuad, or sport quad build while staying safe.

Durable 200D Nylon Fabric That Resists Tearing

Your machine faces strong head winds, sun rays, and trail dirt. For this reason, we build each banner with tough Oxford nylon.

Consequently, the strong cloth will not tear during fast dune runs or rough trail rides. In addition, the thick fabric blocks harsh sun rays and bad weather.

Double-Sided Embroidered Artwork That Lasts

We stitch the iconic geometric Suzuki “S” emblem directly into the cloth on both sides of the banner. Because we use dense thread, your flag stays clean and easy to read from any angle.

Furthermore, you can pick from many fabric and thread colors to match your machine. Unlike printed flags that crack or peel in the sun, heavy stitching lasts for years.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching gives full 360-degree views.

• Custom Color Options: Choose your favorite fabric and thread colors to match your ride.

• Heavy-Duty Fabric: Weather-proof 200D Oxford nylon resists wind tear and sun fade.

• Multiple Shapes and Sizes: Pick from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Fits fiberglass rods, lighted whips, trike poles, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Suzuki

The post Suzuki S appeared first on Devil Woman Flags.

Stay Visible Across High-Speed Dunes, Washes, and Mountain Trails

Navigating blind dune crests, dense forest trails, and dusty desert washes requires maximum height and visibility. In fact, a high-mounted safety whip banner ensures approaching UTVs, dirt bikes, and sand rails spot your rig well before cresting a ridge. Therefore, fellow drivers can navigate safely around blind turns and avoid dangerous head-on collisions.

Whether carving bowls at Glamis, crawling rocky paths in Moab, or blasting wide-open fire roads, this banner commands attention. Fly a bold off-road statement that matches your machine while meeting state and park safety flag regulations.

Tough 200D Oxford Nylon Built to Endure High Speeds and Wind Whip

Flimsy printed flags tear away from seams and shred to ribbons under high speeds and desert winds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels sand grit, mud splatter, and roost spray with ease. Consequently, your flag stays intact and vibrant through intense off-road weekends.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and sandblast away in rough outdoor conditions. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the arched flaming text “KAWASAKI” and an intricately detailed 4-seat Kawasaki Teryx KRX 4 1000 side-by-side in dense black thread across high-visibility bright orange cloth. Thus, your off-road whip banner will look sharp and hold up to every ride.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and off-roaders spot your flag clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Off-Road Dune Compliance: Elevated whip mounting ensures your UTV meets OHV park safety flag requirements.

• Multiple Secure Mounts: Choose standard pole sleeves, solid brass grommets, or lighted whip sleeves[cite: 8, 11].

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit almost any off-road vehicle or trail setup[cite: 8]:

• Side-by-Sides & UTVs: Fits Kawasaki Teryx KRX 1000, KRX4, Mule, Polaris RZR, Can-Am Maverick X3, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Dune Buggies & Sand Rails: Mounts cleanly to upper roll cages and fiberglass safety poles.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Dirt Bikes & ATC 3-Wheelers: Mounts to rear axle whip brackets for sand dune compliance.

• Off-Road Trucks & Jeeps: Perfect for front bumper mounts, bed chase racks, and tailgate whip brackets.

• Golf Carts & Neighborhood Cruisers: Fits rear roof canopy struts and custom grab handles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Sized for 1″ to 1.25″ whip tubes for evening duners running lighted LED whip poles.

Need help putting your flag on? View our Whip Flag Mounting Instructions

Kawasaki Teryx KRX 1000

The post Kawasaki Teryx KRX appeared first on Devil Woman Flags.

Why Run a Kawasaki Teryx KRX 1000 Safety Whip Flag on Your Rig

Whether tackling technical rock crawls at Sand Hollow, navigating tight forest switchbacks, or climbing razorbacks at Glamis, remaining visible over blind ridges and sand bowls is vital for trail safety and park compliance.

This custom design features the official-style Teryx KRX 1000 emblem, showcasing vibrant red Teryx and 1000 script paired with a bold, metallic silver KRX center logo. The high-contrast embroidery stands out sharply against the deep black nylon background, ensuring oncoming side-by-side drivers and spotters see your machine well before you meet on the trail.

200D Oxford Nylon Built for Brutal Trail & Dune Abuse

Standard screen-printed flags shred, tear, and bleach quickly when subjected to 60+ mph wind buffeting, low-hanging trail branches, and intense desert sunlight. For this reason, we build every banner with resilient 200D Oxford nylon.

Consequently, this fabric prevents premature fly-end fraying, repels trail mud and water, and resists UV fading through grueling riding seasons. Whether attached to your roll cage, whip mount tab, or rear chase rack, it holds its shape through the roughest terrain.

Double-Sided Machine Embroidery That Outlasts Printing

Screen-printed logos crack, peel, and fade under continuous sun and trail exposure. In contrast, our Kawasaki KRX 1000 design is directly machine-embroidered on both sides of the banner.

Both sides feature clean, dense thread coverage with zero unsightly reverse-side bleed. The dual-tone red and silver embroidery remains clean, sharp, and vivid through countless dusty rides and pressure washes.

Key Features of This Embroidered UTV Flag

• Double-Sided Machine Embroidery: Crisp two-sided embroidery provides complete 360-degree visibility from all angles.

• Heavy-Duty 200D Oxford Nylon: Resists wind whipping, branch strikes, roost, and sun bleaching.

• Tailored for Kawasaki Enthusiasts: Perfectly complements Kawasaki Teryx KRX 1000, KRX4 1000, Trail Edition, and eS models.

• Dune & Trail Park Compliant: Sized and built to meet state OHV park and public sand dune safety whip flag requirements.

• Flexible Attachment Options: Available with heavy-duty solid brass grommet clip systems, standard whip sleeves, or lighted LED whip sleeves.

📐 Specifications & Sizing

Available Sizes

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant

• 12″ x 18″ Pennant

Mounting Options

• Clip System: Heavy-duty solid brass grommets set into the reinforced hem for carabiner, zip-tie, or rubber-lined clamp attachment to roll cages and whip mounts.

• Regular Whip Sleeve: Reinforced channel slides smoothly over standard 1/4″, 5/16″, and 3/8″ fiberglass whip poles.

• Lighted Whip Sleeve: Sized to slide over 1″ LED whip tubes; includes zip tie, mini hose clamp, and instructions.

Need help installing? View our Whip Flag Mounting Instructions.

SIDE x SIDE KRX OR RZR (2 DESIGNS)

The post Kawasaki Teryx KRX 1000 appeared first on Devil Woman Flags.

Stay Visible Across High-Speed Dunes, Washes, and Mountain Trails

Navigating blind dune crests, dense forest trails, and dusty desert washes requires maximum height and visibility. In fact, a high-mounted safety whip banner ensures approaching UTVs, dirt bikes, and sand rails spot your rig well before cresting a ridge. Therefore, fellow drivers can navigate safely around blind turns and avoid dangerous head-on collisions.

Whether carving bowls at Glamis, crawling rocky paths in Moab, or sending it over desert whoops, this banner commands attention. Fly a hilarious, tongue-in-cheek off-road scene that gets laughs at camp while keeping your rig visible and dunes-compliant.

Tough 200D Oxford Nylon Built to Endure High Speeds and Wind Whip

Flimsy printed flags tear away from grommets and shred to ribbons under high speeds and desert winds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels sand grit, mud splatter, and roost spray with ease. Consequently, your flag stays intact and vibrant through intense off-road weekends.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and sandblast away in rough outdoor conditions. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a driver being ejected mid-air next to a side-by-side bouncing off a jump, paired with the witty two-line text “I do ALL” and “my own stunts” in dense white thread across jet-black cloth[cite: 19]. Thus, your off-road whip banner will look sharp and hold up to every ride.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and off-roaders spot your flag clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Off-Road Dune Compliance: Elevated whip mounting ensures your UTV meets BLM, state, and OHV park safety flag rules.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit almost any off-road vehicle or trail setup:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx KRX, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Dune Buggies & Sand Rails: Mounts cleanly to upper roll cages, light bars, and fiberglass safety poles.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Dirt Bikes & ATC 3-Wheelers: Mounts to rear axle whip brackets for sand dune compliance.

• Off-Road Trucks & Chase Rigs: Perfect for front bumper mounts, bed chase racks, and tailgate whip brackets.

• Golf Carts & Neighborhood Cruisers: Fits rear roof canopy struts and passenger handrails.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

Mounting Options & Easy Hardware Choices

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Lighted Whip Sleeve: Sized for 1″ to 1.25″ whip tubes for evening duners running lighted LED whip poles.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Don’t Follow Me

The post I Do All My Own Stunts UTV appeared first on Devil Woman Flags.

Product Long Description

Stay Visible Across High-Speed Dunes, Washes, and Mountain Trails

Navigating blind dune crests, dense forest trails, and dusty desert washes requires maximum height and visibility. In fact, a high-mounted safety whip banner ensures approaching UTVs, dirt bikes, and sand rails spot your rig well before cresting a ridge. Therefore, fellow drivers can navigate safely around blind turns and avoid dangerous head-on collisions.

Whether carving bowls at Glamis, crawling rocky paths in Moab, or blasting wide-open fire roads, this banner commands attention. Fly a bold off-road statement that celebrates the UTV lifestyle while meeting state and park safety flag regulations.

Tough 200D Oxford Nylon Built to Endure High Speeds and Wind Whip

Flimsy printed flags tear away from grommets and shred to ribbons under high speeds and desert winds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels sand grit, mud splatter, and roost spray with ease. Consequently, your flag stays intact and vibrant through intense off-road weekends.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and sandblast away in rough outdoor conditions. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the arched top text “SIDE X SIDE” in silver-gray thread, a detailed side-by-side ripping through dirt roost in white and silver, and the bottom motto “IS HOW WE RIDE!” across bright red cloth. Thus, your off-road whip banner will look sharp and hold up to every ride.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and off-roaders spot your flag clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Off-Road Dune Compliance: Elevated whip mounting ensures your UTV meets OHV park safety flag requirements.

• Multiple Secure Mounts: Choose standard pole sleeves, solid brass grommets, or lighted whip sleeves[cite: 8, 11].

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit almost any off-road vehicle or trail setup[cite: 8]:

• Side-by-Sides & UTVs: Fits Polaris RZR, Pro R, Turbo R, Can-Am Maverick X3, Defender, Honda Talon, Kawasaki Teryx KRX, and Yamaha YXZ roll cages and whip mounts.

• Dune Buggies & Sand Rails: Mounts cleanly to upper roll cages and fiberglass safety poles.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Dirt Bikes & ATC 3-Wheelers: Mounts to rear axle whip brackets for sand dune compliance.

• Off-Road Trucks & Jeeps: Perfect for front bumper mounts, bed chase racks, and tailgate whip brackets.

• Golf Carts & Neighborhood Cruisers: Fits rear roof canopy struts and custom grab handles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps

• Lighted Whip Sleeve: Sized for 1″ to 1.25″ whip tubes for evening duners running lighted LED whip poles.

Need help putting your flag on? View our Whip Flag Mounting Instructions

SIDE x SIDE KRX OR RZR (2 DESIGNS)

The post Side x Side Is How We Ride appeared first on Devil Woman Flags.

Why Choose a Suzuki Safety Flag for Your Rig

Riding low machines on public trails can put you out of sight. Therefore, running a tall whip flag is vital for rider safety.

This flag pairs champion yellow visibility with the bold red Suzuki “S” emblem and blue brand lettering. In addition, the sharp stitching helps trail spotters see your machine right away. As a result, you can represent your QuadRacer, QuadSport, or dirt bike build while staying safe.

Durable 200D Nylon Fabric That Resists Tearing

Your machine faces strong head winds, sun rays, and trail dirt. For this reason, we build each banner with tough Oxford nylon.

Consequently, the strong cloth will not tear during fast dune runs or rough trail rides. In addition, the thick fabric blocks harsh sun rays and bad weather.

Double-Sided Embroidered Artwork That Lasts

We stitch the iconic red “S” logo and blue Suzuki text directly into the cloth on both sides of the banner. Because we use dense thread, your flag stays clean and easy to read from any angle.

Furthermore, you can pick from many fabric and thread colors to match your machine. Unlike printed flags that crack or peel in the sun, heavy stitching lasts for years.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching gives full 360-degree views.

• Custom Color Options: Choose your favorite fabric and thread colors to match your ride.

• Heavy-Duty Fabric: Weather-proof 200D Oxford nylon resists wind tear and sun fade.

• Multiple Shapes and Sizes: Pick from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Fits fiberglass rods, lighted whips, trike poles, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Suzuki S

The post Suzuki appeared first on Devil Woman Flags.

Why Run a Kawasaki Whip Flag on Your Rig

Whether powering through massive dune bowls at Glamis, Buttercup, Dumont Dunes, or Sand Hollow, crawling boulder beds, or running wide-open desert trails, flying a tall safety whip flag ensures oncoming machines, spotters, and trail leaders spot your vehicle before you crest blind hills or blind turns.

This triangular pennant pays homage to legendary Japanese off-road performance, featuring the iconic two-tier Kawasaki emblem centered across the face. The upper section showcases the iconic stylized block “K” logo emblem, underscored by the classic Kawasaki brand typography beneath it. Stitched directly in vibrant, high-density lime green thread onto rich black 200D Oxford nylon, this design delivers sharp, factory Team Green contrast that pairs perfectly with OEM plastics, custom cage work, and aftermarket wraps.

200D Oxford Nylon Built for Rigorous Trail & Dune Abuse

Standard printed novelty flags fray quickly along the fly point, crack under continuous wind whip, and bleach out rapidly under harsh outdoor sunlight. For this reason, we craft every banner using heavy-duty 200D Oxford nylon.

Consequently, this fabric prevents premature fly-end fraying, repels thick trail mud and sand roost, and resists UV fading across demanding riding seasons. Whether mounted to your roll cage bracket, chase rack tab, or fiberglass whip pole, it delivers lasting performance.

Double-Sided Machine Embroidery That Outlasts Printing

Screen-printed graphics and vinyl heat transfers peel, flake, and wash away under abrasive sand roost, mud, and high-pressure washers. In contrast, our Kawasaki artwork is directly machine-embroidered on both sides of the banner.

Both sides feature clean, dense thread coverage with zero unsightly reverse-side bleed. The sharp angles of the block “K” cutout, crisp text margins, and solid lime green fills maintain needle-sharp detail ride after ride.

Key Features of This Embroidered Off-Road Flag

• Double-Sided Machine Embroidery: Complete two-sided embroidery provides clear 360-degree visibility from all angles.

• Tough 200D Oxford Nylon: Heavy-duty fabric resists wind whip, branch strikes, roost abrasion, and UV degradation.

• Factory Brand & Off-Road Heritage Theme: Tailored for Kawasaki Teryx KRX 1000, Mule, Brute Force, KFX sport quads, and KX dirt bikes.

• Dune & Trail Park Ready: Meets visibility and height standards for public sand dunes and state OHV recreation areas.

• Flexible Attachment Options: Available with solid brass grommet clip systems, reinforced regular whip sleeves, or lighted LED whip sleeves.

📐 Specifications & Sizing

Available Sizes

• 10″ x 13.5″ Pennant

• 12″ x 18″ Pennant

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

Mounting Options

• Clip System: Heavy-duty solid brass grommets set into the reinforced hem for carabiner, zip-tie, or rubber-lined clamp attachment to roll cages, rear tabs, and whip mounts.

• Regular Whip Sleeve: Reinforced channel slides smoothly over standard 1/4″, 5/16″, and 3/8″ fiberglass whip poles.

• Lighted Whip Sleeve: Sized to slide over 1″ to 1.25″ LED whip tubes; includes zip tie, mini hose clamp, and instructions.

Need help installing? View our Whip Flag Mounting Instructions.

Kawasaki Teryx KRX 1000

The post Kawasaki appeared first on Devil Woman Flags.