Why Choose an I Heart Guns Titties and Beer Safety Flag for Your Rig

Riding low machines on public trails can put you out of sight. Therefore, running a tall whip flag is vital for rider safety.

This flag pairs high visibility with wild adult humor. In addition, the sharp stitching helps trail spotters see your machine right away. As a result, you can match your build while staying safe.

Durable 200D Nylon Fabric That Resists Tearing

Your machine faces strong head winds, sun rays, and trail dirt. For this reason, we build each banner with tough Oxford nylon.

Consequently, the strong cloth will not tear during fast dune runs or rough trail rides. In addition, the thick fabric blocks harsh sun rays and bad weather.

Double-Sided Embroidered Artwork That Lasts

We stitch the guns, beer mug, heart, and boobs graphic directly into the cloth on both sides of the banner. Because we use dense thread, your flag stays clean and easy to read from any angle.

Furthermore, you can pick from many fabric and thread colors to match your machine. Unlike printed flags that crack or peel in the sun, heavy stitching lasts for years.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching gives full 360-degree views.

• Custom Color Options: Choose your favorite fabric and thread colors to match your ride.

• Heavy-Duty Fabric: Weather-proof 200D Oxford nylon resists wind tear and sun fade.

• Multiple Shapes and Sizes: Pick from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Fits fiberglass rods, lighted whips, trike poles, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Show Me Them TITTIES

The post Guns Titties and Beer appeared first on Devil Woman Flags.

Boobies Outline Safety Flag – Custom Double-Sided Embroidered Pennant

Why Choose a Boobies Outline Safety Flag for Your Trike or Rig

Whether tearing across open sand bowls at Glamis, rallying around camp, or cutting through trails on an ATV or side-by-side, running a tall whip flag is essential for rider safety and group awareness. This minimalist boobies design pairs sharp line-of-sight visibility with adult humor, alerting oncoming traffic, spotters, and trail riders while coordinating seamlessly with your machine’s custom setup.

Durable 200D Nylon Fabric That Resists Tearing

Because your ride encounters fierce head-on wind, heavy sun exposure, and trail debris, each banner uses tough Oxford nylon. As a result, the material will not rip or fray easily during wide-open dune runs, hill climbs, or high-speed trail rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and direct UV sun exposure.

Double-Sided Embroidered Artwork That Lasts

We stitch the stylized outline artwork directly into the fabric using high-density embroidery thread on both sides of the banner. Your flag stays sharp, vibrant, and completely legible from every angle.

Available in a wide selection of custom fabric and thread color combinations, each flag is built to order to match your exact rig. Unlike cheap screen-printed alternatives that peel, crack, and fade under trail dust and intense sun, heavy-duty stitching holds up season after season.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Custom Color Combinations: Choose from multiple fabric and thread colors to match your machine.

• Heavy-Duty Fabric: Weather-resistant 200D Oxford nylon blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from sleek pennant or classic rectangle cuts.

• Flexible Mount Options: Easily fits standard fiberglass rods, lighted whips, recumbent poles, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Show Me Your

The post Boobies appeared first on Devil Woman Flags.

Why Choose a Show Me Your Safety Flag for Your Rig

Whether tearing across open sand bowls at Glamis, rallying around camp, or cutting through tight off-road trails, running a tall whip flag is essential for rider safety and group awareness. This bold design pairs high-contrast visibility with unfiltered adult humor, alerting oncoming traffic, spotters, and trail riders while coordinating seamlessly with your machine’s custom setup.

Durable 200D Nylon Fabric That Resists Tearing

Because your ride encounters fierce head-on wind, heavy sun exposure, and trail debris, each banner uses tough Oxford nylon. As a result, the material will not rip or fray easily during wide-open dune runs, hill climbs, or high-speed trail rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and direct UV sun exposure.

Double-Sided Embroidered Artwork That Lasts

We stitch the stylized “Show Me Your” script typography and outline graphic directly into the fabric using high-density embroidery thread on both sides of the banner. Your flag stays sharp, vibrant, and completely legible from every angle>

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Custom Color Combinations: Choose from multiple fabric and thread colors to match your machine.

• Heavy-Duty Fabric: Weather-resistant 200D Oxford nylon blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Easily fits standard fiberglass rods, lighted whips, recumbent poles, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Show Me Your Tits

The post Show Me Your appeared first on Devil Woman Flags.

Why Choose a Show Me Them Boobies Safety Flag for Your Rig

Whether tearing across open sand bowls at Glamis, rallying around camp, or cutting through rugged trails, running a whip flag is essential for safety and group awareness. This bold banner delivers sharp line-of-sight presence paired with crowd-pleasing adult humor. The high-contrast embroidery shines brightly against the fabric, alerting oncoming traffic while making your machine the center of attention.

Durable 200D Nylon Fabric That Resists Tearing

Because your machine encounters relentless head-on wind, trail dust, and blazing desert heat, each banner uses tough Oxford nylon. As a result, the material will not rip or fray easily during wide-open dune runs or high-speed trail rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and direct UV sun exposure.

Double-Sided Embroidered Typography & Graphics That Last

We stitch the stylized “SHOW ME THEM BOOBIES” lettering and outline artwork directly into the fabric using dense silver embroidery thread on both sides of the banner. Your flag stays crisp and legible from every angle. Unlike cheap screen-printed alternatives that peel, crack, and wash out under the desert sun, tight embroidery holds up season after season.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Heavy-Duty Fabric: Weather-resistant cloth blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Easily fits recumbent whip poles, standard fiberglass rods, lighted whips, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Boobies Make Me Smile

The post Show Me Them Boobies appeared first on Devil Woman Flags.

Why Choose a Dump Em Out Safety Flag for Your Rig

When you party at the dunes, drag strips, or open backcountry trails, a high-visibility whip banner is truly essential. Other riders can spot your setup quickly across the sand, keeping you safe while showing off an unfiltered, good-time attitude.

Durable 200D Nylon Fabric That Resists Tearing

Because your machine faces extreme wind, heavy sandblast, and outdoor brush, each banner uses tough Oxford nylon. As a result, the material will not rip or fray easily during fast rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and sun exposure.

Double-Sided Embroidered Artwork That Lasts

We sew the bold “Dump ‘Em Out!” lettering and clean graphic outlines on both sides of the banner. Your setup stays visible and hilarious from every angle. Unlike cheap screen-printed products that peel and crack under the sun, tight embroidery keeps your setup looking clean trip after trip.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Heavy-Duty Fabric: Weather-resistant cloth blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Easily fits standard whip poles, lighted whips, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

F EM

The post Dump Em Out appeared first on Devil Woman Flags.

Why Choose “I Bet You Wont Show Me Your Boobs” Safety Flag for Your Rig

When you hit the dunes, party at the drags, or roll through busy weekend trails, a high-visibility whip banner is truly essential. Other riders can spot your setup quickly across the sand, keeping you safe while putting your unfiltered, rowdy humor on full display. If you want something that’s both funny and functional, the I Bet You Wont Show Me Your Boobs safety flag definitely turns heads.

Durable 200D Nylon Fabric That Resists Tearing safety flag

Because your machine faces extreme wind, heavy sandblast, and outdoor brush, each banner uses tough Oxford nylon. As a result, the material will not rip or fray easily during fast rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and sun exposure. This kind of quality is what you’d expect from an I Bet You Wont Show Me Your Boobs safety flag built for the long haul.

Double-Sided Embroidered Text That Lasts

We sew the bold red and white block lettering directly into the material on both sides of the banner. Your setup stays visible and hilarious from every angle. Unlike cheap screen-printed products that peel and crack under the sun, tight embroidery keeps your setup looking clean trip after trip. Adding this detailed embroidery ensures your I Bet You safety flag from the “Bet You Wont Show Me Your Boobs” collection stands out season after season.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Heavy-Duty Fabric: Weather-resistant cloth blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Easily fits standard whip poles, lighted whips, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter. For those looking for a fun and bold whip banner, the I Bet You Wont Show Me Your safety flag fits perfectly with this sleeve.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions. For installation questions about your I Bet You Wont Show Me Your Boobs flag, visit this guide.

My Those Boobs Look Heavy

The post I Bet Your Boobs appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. One effective solution is to use a flash me safety flag, which makes your vehicle stand out in any environment. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this funny, bold design high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the bold “FLASH ME!!!” typography and graphic in dense white thread that stands out vividly against the high-visibility blue background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Dirty Girl

The post Flash Me appeared first on Devil Woman Flags.

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this hilarious novelty design high above your machine with fearless humor and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a humorous silhouette of a reclining, bearded chubby man alongside the “BIG SEXY” typography in dense black thread that stands out vividly against the high-visibility orange background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

• Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

• Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

• Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

• Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a selection of recreational, utility, and commuter vehicles:

• Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

• Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

• Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

• ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

• Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

• Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

• 10″ x 15″ Rectangle

• 13″ x 22″ Rectangle

• 10″ x 13.5″ Pennant / Triangle

• 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

• Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

• Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

• Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Big Sexy

The post Big Sexy Chubby Guy appeared first on Devil Woman Flags.

Show Me Your Tits Safety Flag – Custom Double-Sided Embroidered Banner

Why Choose a Show Me Your Tits Safety Flag for Your Rig

Whether carving across open dunes at Glamis, rallying around camp, or navigating group trail rides, running a tall whip flag is essential for rider safety and group awareness. This bold design pairs high-contrast visibility with unfiltered adult humor, alerting oncoming traffic, spotters, and fellow riders while coordinating seamlessly with your machine’s custom setup.

Durable 200D Nylon Fabric That Resists Tearing

Because your ride encounters fierce head-on wind, heavy sun exposure, and trail debris, each banner uses tough Oxford nylon. As a result, the material will not rip or fray easily during wide-open dune runs, hill climbs, or high-speed trail rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and direct UV sun exposure.

Double-Sided Embroidered Artwork That Lasts

We stitch the stylized “SHOW ME YOUR TITS” typography and outline artwork directly into the fabric using high-density embroidery thread on both sides of the banner. Your flag stays sharp, vibrant, and completely legible from every angle.

Available in a wide selection of custom fabric and thread color combinations, each flag is built to order to match your exact rig. Unlike cheap screen-printed alternatives that peel, crack, and fade under trail dust and intense sun, heavy-duty stitching holds up season after season.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Custom Color Combinations: Choose from multiple fabric and thread colors to match your machine.

• Heavy-Duty Fabric: Weather-resistant 200D Oxford nylon blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from classic rectangle or sleek pennant cuts.

• Flexible Mount Options: Easily fits standard fiberglass rods, lighted whips, recumbent poles, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 13″ x 22″ Rectangle

• 10″ x 15″ Rectangle

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Show Me Them Boobies

The post Show Me Your Tits appeared first on Devil Woman Flags.

Why Choose a Sexy Girl Safety Flag for Your Rig

When you blast across open sand dunes, hit rugged trails, or tie up at the sandbar, high visibility is essential. Other riders and boaters can spot your sleek black pennant quickly from a distance, keeping you safe while showcasing the timeless, rebellious mudflap girl silhouette.

Durable 200D Nylon Fabric That Resists Tearing

Because your machine faces extreme wind, heavy sandblast, and outdoor brush, each pennant uses tough Oxford nylon. As a result, the material will not rip or fray easily during fast rides. Furthermore, the high-strength fabric easily resists harsh outdoor weather conditions and direct sun exposure.

Double-Sided Embroidered Silhouette Stitching That Lasts

We sew the iconic reclining silhouette in bright silver embroidery thread directly into the heavy-duty black fabric on both sides of the banner. Your setup stays visible and sharp from every direction. Unlike cheap screen-printed products that peel and crack under the sun, tight embroidery keeps your setup looking clean trip after trip.

Key Features of This Embroidered Banner

• Double-Sided Embroidery: Two-sided stitching provides full 360-degree visibility.

• Heavy-Duty Fabric: Weather-resistant cloth blocks UV rays and wind damage.

• Multiple Shapes and Sizes: Choose from sleek pennant or classic rectangle cuts.

• Flexible Mount Options: Easily fits standard whip poles, lighted whips, or clip setups.

📐 Specifications & Sizing

Available Sizes

• 12″ x 18″ Pennant

• 10″ x 13.5″ Pennant

Mounting Options

• Regular Whip Sleeve: Fits standard whip poles between 1/4″ and 3/8″ diameter.

• Lighted Whip Sleeve: Fits lighted whip poles up to 1″ diameter. Includes zip tie, mini hose clamp, and instructions.

• Clip System: Heavy-duty brass grommets installed on the sleeve for quick clipping to whip setups, boat mounts, marine antennas, or roll cages.

Need help installing? View our Whip Flag Mounting Instructions.

Mudflap Girl

The post Sexy Girl appeared first on Devil Woman Flags.