black safety flag Archives - Devil Woman Flags https://www.devilwomanflags.com/product-tag/black-safety-flag/ Creating custom flags for every adventure Thu, 22 Oct 2026 23:17:15 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.devilwomanflags.com/wp-content/uploads/2026/04/cropped-devil-woman-flags-STICKER-4-32x32.jpg black safety flag Archives - Devil Woman Flags https://www.devilwomanflags.com/product-tag/black-safety-flag/ 32 32 208028617 Pirate Dog https://www.devilwomanflags.com/shop/skull-pirate-flags/pirate-dog-safety-flag/ Tue, 31 Dec 2024 16:39:50 +0000 https://www.devilwomanflags.com/?post_type=product&p=14496 Do you want bold dog-lover pirate style, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered pitbull pirate safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Pirate Dog appeared first on Devil Woman Flags.

]]> Pirate Dog Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic pitbull pirate safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a striking pitbull dog skull and crossbones graphic in dense silver thread that stands out vividly against the sleek black background cloth. Thus, your custom pitbull pirate safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Pitbull Dog

 

The post Pirate Dog appeared first on Devil Woman Flags.

]]> 14496 Blow Me https://www.devilwomanflags.com/shop/sayings-flags/blow-me-flag/ https://www.devilwomanflags.com/shop/sayings-flags/blow-me-flag/#respond Fri, 12 Jul 2024 22:32:38 +0000 https://www.devilwomanflags.com/?post_type=product&p=13497 Do you want hilarious turbo style, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered Blow Me turbo flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Blow Me appeared first on Devil Woman Flags.

]]> Blow Me Flag – Custom Double-Sided Embroidered Whip Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner such as a blow me safety flag ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this funny, high-horsepower design high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a clever turbocharger graphic integrated directly into the “BLOW ME” typography in dense white thread that stands out vividly against the sleek black background cloth. Thus, your custom whip banner will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Boobies

 

The post Blow Me appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/sayings-flags/blow-me-flag/feed/ 0 13497 Beer Mug Pirate https://www.devilwomanflags.com/shop/skull-pirate-flags/beer-mug-pirate-safety-flag/ https://www.devilwomanflags.com/shop/skull-pirate-flags/beer-mug-pirate-safety-flag/#respond Tue, 26 Mar 2024 15:34:47 +0000 https://www.devilwomanflags.com/?post_type=product&p=12303 Do you want bold drinking humor, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered beer mug pirate safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Beer Mug Pirate appeared first on Devil Woman Flags.

]]> Beer Mug Pirate Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic beer mug pirate safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a striking beer stein mug housing a skull and crossbones graphic in dense white thread that stands out vividly against the sleek black background cloth. Thus, your custom beer mug pirate safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Beer Mug

 

The post Beer Mug Pirate appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/skull-pirate-flags/beer-mug-pirate-safety-flag/feed/ 0 12303 Pirate Eyepatch Skull https://www.devilwomanflags.com/shop/skull-pirate-flags/pirate-eyepatch-skull-safety-flag/ https://www.devilwomanflags.com/shop/skull-pirate-flags/pirate-eyepatch-skull-safety-flag/#respond Sun, 13 Nov 2022 20:56:02 +0000 https://www.devilwomanflags.com/?post_type=product&p=8995 Do you want bold pirate style, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered pirate eyepatch skull safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Pirate Eyepatch Skull appeared first on Devil Woman Flags.

]]> Pirate Eyepatch Skull Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic pirate eyepatch skull safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a classic Jolly Roger skull wearing an eyepatch alongside crossbones in dense white thread that stands out vividly against the sleek black background cloth. Thus, your custom pirate eyepatch skull safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Steal Your Face Full Color Pirate

 

The post Pirate Eyepatch Skull appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/skull-pirate-flags/pirate-eyepatch-skull-safety-flag/feed/ 0 8995 One-Eyed Pirate https://www.devilwomanflags.com/shop/skull-pirate-flags/one-eyed-pirate-safety-flag/ https://www.devilwomanflags.com/shop/skull-pirate-flags/one-eyed-pirate-safety-flag/#respond Fri, 06 May 2022 20:21:06 +0000 https://www.devilwomanflags.com/?post_type=product&p=7042 Do you want bold swashbuckling style, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered one-eyed pirate safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post One-Eyed Pirate appeared first on Devil Woman Flags.

]]> One-Eyed Pirate Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic one-eyed pirate safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a classic Jolly Roger skull wearing an eyepatch alongside crossbones in dense white thread that stands out vividly against the sleek black background cloth. Thus, your custom one-eyed pirate safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

One Eyed Willie Goonies

 

The post One-Eyed Pirate appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/skull-pirate-flags/one-eyed-pirate-safety-flag/feed/ 0 7042 Shut Up Bitch I’m Scared Too https://www.devilwomanflags.com/shop/adult-flags/shut-up-bitch-im-scared-too-safety-flag/ https://www.devilwomanflags.com/shop/adult-flags/shut-up-bitch-im-scared-too-safety-flag/#respond Sun, 14 Nov 2021 16:35:59 +0000 https://www.devilwomanflags.com/?post_type=product&p=4644 Do you want hilarious off-road humor, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered shut up bitch im scared too safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Shut Up Bitch I’m Scared Too appeared first on Devil Woman Flags.

]]> Shut Up Bitch I’m Scared Too Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic shut up bitch I’m scared too safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights the bold “SHUT UP BITCH! I’M SCARED TOO!” typography in dense red and white thread that stands out vividly against the sleek black background cloth. Thus, your custom shut up bitch im scared too safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Bitch Dust Tinkerbell

 

The post Shut Up Bitch I’m Scared Too appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/adult-flags/shut-up-bitch-im-scared-too-safety-flag/feed/ 0 4644 Pirate Smiley Face https://www.devilwomanflags.com/shop/skull-pirate-flags/pirate-smiley-safety-flag/ Wed, 10 Nov 2021 00:01:03 +0000 https://www.devilwomanflags.com/?post_type=product&p=4516 Do you want bold pirate humor, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered pirate smiley safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Pirate Smiley Face appeared first on Devil Woman Flags.

]]> Pirate Smiley Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic pirate smiley safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a classic yellow smiley face wearing a red polka-dot bandana, black eyepatch, and gold hoop earring in dense embroidery thread that stands out vividly against the sleek black background cloth. Thus, your custom pirate smiley safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Watchmen Ouchy Smiley

 

The post Pirate Smiley Face appeared first on Devil Woman Flags.

]]> 4516 Bow Skull https://www.devilwomanflags.com/shop/skull-pirate-flags/bow-skull-safety-flag/ https://www.devilwomanflags.com/shop/skull-pirate-flags/bow-skull-safety-flag/#respond Fri, 05 Nov 2021 00:55:08 +0000 https://www.devilwomanflags.com/?post_type=product&p=2802 Do you want bold style, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered bow skull safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and bow color combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Bow Skull appeared first on Devil Woman Flags.

]]> Bow Skull Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic bow skull safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a detailed white skull with feminine eyelashes, a customizable hair bow available in multiple shades, and crossbones in dense embroidery thread that stands out vividly against the sleek black background cloth. Thus, your custom bow skull safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose standard pole sleeves, reinforced sleeves, or the clip system with solid brass grommets.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

I Am Just A Girl

 

The post Bow Skull appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/skull-pirate-flags/bow-skull-safety-flag/feed/ 0 2802 Raiders Nation Skull https://www.devilwomanflags.com/shop/skull-pirate-flags/raiders-nation-skull-safety-flag/ https://www.devilwomanflags.com/shop/skull-pirate-flags/raiders-nation-skull-safety-flag/#respond Fri, 05 Nov 2021 00:07:00 +0000 https://www.devilwomanflags.com/?post_type=product&p=2759 Do you want bold game-day style, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered raiders nation skull safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Raiders Nation Skull appeared first on Devil Woman Flags.

]]> Raiders Nation Skull Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic raiders nation skull safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights a classic gridiron-themed skull wearing a helmet with a center stripe, backed by crossed swords in dense white thread that stands out vividly against the sleek black background cloth. Thus, your custom raiders nation skull safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Las Vegas Raiders

 

The post Raiders Nation Skull appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/skull-pirate-flags/raiders-nation-skull-safety-flag/feed/ 0 2759 Blackbeard https://www.devilwomanflags.com/shop/skull-pirate-flags/blackbeard-safety-flag/ https://www.devilwomanflags.com/shop/skull-pirate-flags/blackbeard-safety-flag/#respond Fri, 05 Nov 2021 00:06:51 +0000 https://www.devilwomanflags.com/?post_type=product&p=2757 Do you want bold historical pirate style, maximum roadway visibility, and heavy-duty strength for your ride? If so, choose our double-sided embroidered blackbeard safety flag!

We make every banner using tough 200D Oxford nylon cloth. Because of this durable build, our flags handle brisk wind whip, high-speed trail runs, and daily neighborhood cruising without fraying. In addition, the fabric resists sun fading and road spray. Multiple fabric color and needlework combinations let you customize your whip setup.

Do you have questions about shipping or returns? If so, check our Shipping Policy or read our Return Policy.

The post Blackbeard appeared first on Devil Woman Flags.

]]> Blackbeard Safety Flag – Custom Double-Sided Embroidered Banner

Command Instant Attention on Roads, Trails, and Dunes

Navigating busy city streets, crowded OHV sand dunes, or low-profile bike paths demands unmistakable visibility. In fact, flying an elevated safety whip banner ensures oncoming traffic, large trucks, and fellow riders spot your vehicle from a safe distance. Therefore, drivers have plenty of time to react, give you wide clearance, and keep every excursion safe.

Whether carving sand dunes in a side-by-side, cruising neighborhood avenues in a golf cart, or touring open roads on a recumbent trike, this banner stands out. Fly this iconic blackbeard safety flag high above your machine with fearless flair and absolute confidence.

Tough 200D Oxford Nylon Built to Endure Continuous Wind

Thin, screen-printed polyester flags tear away from seams and shred to ribbons under continuous outdoor speeds.

In contrast, our team builds every banner with thick 200D Oxford nylon fabric. For that reason, this strong weave stops fly-end fraying before it starts. The rugged cloth also repels trail mud, sand grit, and rain spray with ease. Consequently, your flag stays intact and sharp through years of active riding.

Direct Double-Sided Machine Embroidery That Lasts

Screen prints and vinyl heat transfers crack, peel, and fade under relentless sun exposure. Because we value real quality, we stitch our artwork directly onto the fabric.

Most importantly, our detailed embroidery covers both sides of the banner. Both sides feature thick, clean thread coverage with no messy bleed-through. The stitched artwork highlights Edward Teach’s legendary banner featuring a horned skeleton holding an hourglass and spearing a bleeding red heart with surrounding blood drops in dense thread that stands out vividly against the sleek black background cloth. Thus, your custom blackbeard safety flag will look sharp from every single angle.

Key Features of Our Heavy-Duty Whip Banners

  • Two-Sided Needlework: We machine-stitch both sides so riders and drivers spot your banner clearly from either direction.

  • Heavy-Duty Oxford Cloth: Tough 200D woven cloth resists high-speed wind whip, branch snags, and sun fading.

  • Universal Elevation Safety: High whip mounting keeps low-profile rides visible to larger vehicles.

  • Multiple Secure Mounts: Choose solid brass grommets, standard pole sleeves, or lighted whip sleeves.

Every Machine and Vehicle You Can Put Our Flags On

Our heavy-duty flags fit a wide selection of recreational, utility, commuter, and marine vehicles:

  • Side-by-Sides & UTVs: Fits Polaris RZR, Can-Am Maverick X3, Kawasaki Teryx, Honda Talon, and Yamaha YXZ roll cages and whip mounts.

  • Golf Carts & Neighborhood Cruisers: Fits Club Car, EZ-GO, Yamaha, and Icon canopy struts and grab bars.

  • Boats & Marine Watercraft: Makes a perfect burgee for sailboats, and mounts easily to pontoon boat rails, kayak safety poles, and powerboat rigging.

  • Recumbent Bikes & Trikes: Mounts cleanly to Catrike, TerraTrike, ICE Trikes, Sun Seeker, and HP Velotechnik whip brackets.

  • ATVs & 4-Wheelers: Attaches to rear utility racks and grab bar whip brackets.

  • Commuter Bicycles & E-Bikes: Fits rear axle dropouts, cargo racks, and child trailer safety whip brackets.

  • Dune Buggies & Sand Rails: Mounts to upper chassis frames and fiberglass safety poles.

📐 Specifications & Sizing

  • 10″ x 15″ Rectangle

  • 13″ x 22″ Rectangle

  • 10″ x 13.5″ Pennant / Triangle

  • 12″ x 18″ Pennant / Triangle

Mounting Options & Easy Hardware Choices

  • Regular Whip Sleeve: This stitched channel slides right over standard 1/4″, 5/16″, and 3/8″ fiberglass whip rods.

  • Clip System: Sturdy solid brass grommets set into the reinforced hem allow easy attachment using carabiners, zip ties, or clamps.

  • Lighted Whip Sleeve: Features a wide stitched channel designed for flags that slide directly over the pole for lighted whips, fitting poles and LED tubes up to 1″ in diameter.

Need help putting your flag on? View our Whip Flag Mounting Instructions.

Blackbeard Pirate Old Roger

 

The post Blackbeard appeared first on Devil Woman Flags.

]]> https://www.devilwomanflags.com/shop/skull-pirate-flags/blackbeard-safety-flag/feed/ 0 2757